|
|
Imperial Pitch Belts - XL, L, H, XH
Pitch Details 
|
 |
Application Uses
Conveying
|
| These classic trapezoidal tooth pitches are the original timing belt tooth design. This tooth pitch is commonly used for conveying applications. The tooth profile is fairly low and has a large surface area at the tip of the tooth providing good support on sliding conveyor surfaces. |
|
|
T Pitch Belts - T2.5, T5, T10, T20
Pitch Details
|
 |
Application Uses
Conveying
|
| These metric trapezoidal pitches are similar to imperial pitches, commonly used for conveying applications, yet have a slightly deeper tooth engagement than imperial profiles. The tooth meshing is more reliable. However, backlash can be slightly greater. |
|
|
AT Pitch Belts - AT5, AT10, AT20
Pitch Details
|
 |
Application Uses
Linear Positioning
Motion Control
|
| Developed to enable higher load carrying capacity combined with low backlash. Stronger and stiffer tooth makes these belts ideal for linear positioning and motion control, but may require larger pulley diameters |
|
|
STD Pitch Belts - STD5, STD8
Pitch Details
|
 |
Application Uses
Linear Positioning
Power Transmission
|
| Provides superior load distribution, low backlash, and reduced wear and noise characteristics. Excellent profile for linear and power transmission applications |
|
|
HTD® Pitch Belts - HTD5, HTD8, HTD14
Pitch Details
|
 |
Application Uses
Linear Positioning
Power Transmission
|
| Rounded tooth pitch is similar to STD. Excellent profile for rotary linear positioning and power transmission applications. Has deeper tooth engagement. HTD® may exhibit slight increases in noise and wear. |
|
|
GMT3™ Pitch Belts - GMT3™
Pitch Details
|
 |
Application Uses Conveying
|
This 3 mm tooth geometry is designed to run on HTD®, GT and RPP pulley profiles. It is ideal
for conveying applications involving small diameter pulleys. The deep tooth engagement
provides good torque transfer from pulley to belt. The flat top provides a good
running surface for slider beds. |
Products
